HALODISC 2 / Fitment Guide
Tesla Wheel Cover Fitment Guide: Which HALODISC 2 Fits My Tesla?
HALODISC 2 wheel covers are available for selected Tesla Model 3, Model Y, Model S and Model X factory wheel configurations.
To find the correct set, you need to confirm four details:
Quick Fitment Answer
HALODISC 2 currently provides selectable fitment options for:
- Tesla Model 3
- Tesla Model 3 Highland
- Tesla Model Y
- Tesla Model Y Juniper
- Tesla Model S
- Tesla Model X
- Selected 18-inch, 19-inch, 20-inch and 21-inch wheels
After you select your Tesla model on a HALODISC 2 product page, only compatible wheel-size options should be displayed.
Important Current Exclusions
HALODISC 2 is currently listed as not compatible with:
- 2026 Tesla Model 3 Standard with 18-inch Prismata wheels
- 2026 Tesla Model Y Juniper Standard with 18-inch Aperture wheels
- 2026 Tesla Model Y Juniper with 21-inch Arachnid 2.0 wheels
Do not order for one of these configurations unless the individual product page has been updated to specifically confirm compatibility.
Fitment information last reviewed: July 15, 2026.
Find Your HALODISC 2 Fitment
Step 1: Choose Your Tesla Model
Select your vehicle:
Not Sure Which Generation You Have?
Use these general guidelines:
| Vehicle selection | Choose this option when |
|---|---|
| Model 3 | Your vehicle is the original Model 3 design, generally produced before the Highland refresh |
| Model 3 Highland | Your vehicle has the refreshed Model 3 exterior and interior design |
| Model Y | Your vehicle is the original Model Y design |
| Model Y Juniper | Your vehicle is the refreshed Model Y Juniper |
| Model S | Your vehicle is a Tesla Model S |
| Model X | Your vehicle is a Tesla Model X |
Your registration year can help identify the vehicle, but it is not always enough. Production timing, delivery location and trim availability can overlap. When uncertain, compare your vehicle with the product-page photos or send HALOBLK a photo before ordering.
Step 2: Find Your Wheel Size
The easiest way to confirm your wheel size is to look at the writing on the side of your tire.
You may see a tire size such as:
The number after the letter R is the wheel diameter.
- R18 means an 18-inch wheel
- R19 means a 19-inch wheel
- R20 means a 20-inch wheel
- R21 means a 21-inch wheel
- R22 means a 22-inch wheel
Check both the front and rear tires, especially on performance, Plaid or staggered-wheel configurations. Some Tesla models use different front and rear tire widths even when the wheel diameter is the same.
Wheel Size Is Not Enough
Two Tesla wheels can both be 19 inches but use different:
- Spoke shapes
- Center structures
- Rim profiles
- Attachment points
- Factory wheel covers
- Front and rear offsets
Always confirm the factory wheel design as well as the diameter.
Step 3: Identify Your Factory Tesla Wheel
Remove any removable factory aero cover if necessary and compare the alloy wheel underneath with the product-page fitment image.
Look for:
- Number and shape of the spokes
- Whether the spokes are straight, curved or split
- Shape of the center hub
- Existing factory aero cover
- Wheel finish
- Front and rear wheel differences
- Factory wheel name, when known
Examples of Tesla factory wheel names include Aero, Gemini, Induction, Crossflow, Helix 2.0, Tempest, Slipstream, Arachnid, Cyberstream and Turbine.
Do not assume that a HALODISC 2 set will fit another wheel simply because the diameter is the same.
HALODISC 2 Tesla Fitment Matrix
Tesla Model 3 Wheel Cover Fitment
| Tesla configuration | Common wheel setup | HALODISC 2 guidance |
|---|---|---|
| Original Model 3 | 18-inch factory wheels | Select Model 3 and 18-inch on the product page. Compare the underlying alloy wheel with the fitment photo. |
| Original Model 3 | 19-inch factory wheels | Select Model 3 and 19-inch. Confirm the factory wheel shape before ordering. |
| Original Model 3 Performance | 20-inch factory wheels | Select Model 3 and 20-inch only when that option is available for the chosen HALODISC 2 design. |
| Model 3 Highland | Selected factory wheels | Select Model 3 Highland, not Model 3. Then choose the compatible wheel size shown on the product page. |
| 2026 Model 3 Standard | 18-inch Prismata | Not currently compatible. |
HALOBLK separates the original Model 3 and Model 3 Highland in its product selector. Owners should select the correct generation rather than relying only on wheel diameter.
Recommended Model 3 Result Message
Your vehicle: Tesla Model 3
Your wheel: 18-inch factory wheel
Next step: Shop HALODISC 2 designs, select “Model 3,” and confirm that the displayed 18-inch wheel image matches your wheel.
Tesla Model Y Wheel Cover Fitment
| Tesla configuration | Common wheel setup | HALODISC 2 guidance |
|---|---|---|
| Original Model Y | 19-inch Gemini-style factory wheels | Select Model Y and 19-inch. Confirm the underlying factory alloy wheel. |
| Original Model Y | 20-inch Induction-style factory wheels | Select Model Y and 20-inch only when offered for the selected design. |
| Original Model Y Performance | 21-inch factory wheels | Confirm the exact factory wheel and product-page option before ordering. |
| Model Y Juniper | 19-inch Crossflow wheels | Select Model Y Juniper and 19-inch Crossflow fitment. Current Haloblk product imagery specifically references this configuration. |
| Model Y Juniper | 20-inch Helix 2.0 wheels | Select Model Y Juniper and 20-inch only when the Helix 2.0 fitment is shown. Current Haloblk catalog imagery references this configuration. |
| 2026 Model Y Juniper Standard | 18-inch Aperture wheels | Not currently compatible. |
| Model Y Juniper | 21-inch Arachnid 2.0 wheels | Not currently compatible. |
Original Model Y accessories should not automatically be assumed to fit the refreshed Model Y Juniper. Haloblk’s current Model Y guidance tells customers to confirm the model year, original-versus-Juniper generation and individual product compatibility before ordering.
Recommended Model Y Result Message
Your vehicle: Tesla Model Y Juniper
Your wheel: 19-inch Crossflow
Fitment result: Compatible options are available. Select “Model Y Juniper” and “19-inch” on the chosen HALODISC 2 product page.
Tesla Model S Wheel Cover Fitment
HALOBLK currently lists Model S applications for factory wheel families including Tempest, Slipstream and Arachnid wheels.
| Tesla configuration | Factory wheel information | HALODISC 2 guidance |
|---|---|---|
| Model S | Tempest wheels | Select Model S and the exact wheel diameter offered on the product page. |
| Model S | Slipstream wheels | Confirm the wheel diameter and compare the factory wheel with the product fitment image. |
| Model S | Arachnid wheels | Confirm the exact Arachnid generation and wheel size before ordering. |
| Model S with aftermarket wheels | Any size | Do not assume compatibility. Contact HALOBLK with a wheel photo and specifications. |
Model S wheel designs have changed across vehicle generations. “Model S” and “21-inch” alone are not sufficient fitment details.
Recommended Model S Result Message
Your vehicle: Tesla Model S
Your wheel: 19-inch factory wheel
Next step: Select Model S and 19-inch. Confirm that the Tempest, Slipstream or other displayed factory wheel image matches your vehicle.
Tesla Model X Wheel Cover Fitment
HALOBLK’s current Model X collection identifies dedicated applications for:
- 20-inch Cyberstream or staggered factory wheels
- 22-inch Turbine factory wheels
The Model X collection advises buyers to choose the appropriate dedicated kit.
However, some general HALODISC 2 product headings currently describe the product range as fitting 18-inch through 21-inch wheels. Therefore, 22-inch Model X owners should order only when a dedicated 22-inch Model X option is visibly available on the selected product page.
| Tesla configuration | Factory wheel setup | HALODISC 2 guidance |
|---|---|---|
| Model X Long Range or Plaid | 20-inch Cyberstream or staggered wheels | Select Model X and the dedicated 20-inch option. Confirm whether the front and rear kit is designed for the staggered setup. |
| Model X with optional wheel package | 22-inch Turbine wheels | Order only when the dedicated Model X 22-inch option is displayed. Otherwise contact support before purchasing. |
| Model X with aftermarket wheels | Any diameter | Fitment requires individual verification. |
Recommended Model X Result Message
Your vehicle: Tesla Model X
Your wheel: 22-inch Turbine
Fitment result: Manual confirmation required. Send HALOBLK photos of the front and rear wheels before ordering unless the selected product page shows a dedicated 22-inch Model X kit.
Which HALODISC 2 Style Should I Choose?
After confirming your model and wheel fitment, choose the design that best matches your Tesla.
| HALODISC 2 style | Best for |
|---|---|
| RTP Black | Minimalist, motorsport-inspired or stealth appearance |
| RTP White | Bright, clean or high-contrast styling |
| Cyber Track | Futuristic and Cybertruck-inspired appearance |
| Custom Numbers | Personalized numbers, initials or vehicle identity |
| Supercharger | Tesla and EV-themed styling |
| Arrow | Directional, performance-inspired graphics |
| Charging | EV charging-themed visual design |
| H-Industry | Industrial and mechanical styling |
Available designs can vary by Tesla model and wheel size. A design appearing in the store does not automatically mean every fitment is currently in stock.
Always select your Tesla model first and use only the compatible sizes displayed for that model.
Fitment Status Explained
Compatible
Choose this result when:
- The correct Tesla generation is listed
- The correct wheel size is available
- The factory wheel matches the displayed fitment image
- The product page does not list your wheel as an exclusion
You can proceed to choose your HALODISC 2 design.
Manual Verification Required
Choose this result when:
- You do not know the factory wheel name
- Your vehicle has staggered front and rear wheels
- Your vehicle was delivered near a model refresh
- Your wheel design does not match the product photo
- The wheel has been refinished or modified
- You have a 22-inch Model X configuration
- The vehicle has aftermarket wheels
- Your wheel size appears in the selector but your wheel shape is different
Send HALOBLK:
- Tesla model
- Model year
- Vehicle generation
- Front tire size
- Rear tire size
- Clear front-wheel photo
- Clear rear-wheel photo
- Link to the HALODISC 2 style you want
Not Currently Compatible
Do not purchase when:
- Your exact wheel is listed as an exclusion
- Your wheel size is not available after selecting your Tesla model
- You have aftermarket wheels that have not been approved
- Your front and rear configuration does not match the supplied kit
- Support has advised that the wheel profile is incompatible
How to Photograph Your Wheel for Fitment Help
Take the photos outdoors or in a well-lit garage.
Please provide:
Before You Install Your HALODISC 2 Wheel Covers
Complete these checks before attaching the first cover:
- Confirm the model printed on the order
- Confirm the selected vehicle generation
- Confirm the wheel diameter
- Compare the cover with the correct front or rear wheel
- Make sure all parts and installation accessories are present
- Read the complete installation instructions
- Check the cover for shipping damage
- Test one wheel carefully before installing the full set
- Do not force a cover that does not align correctly
- Contact support immediately if the fit appears incorrect
Installation should never require cutting, drilling or permanent modification to a compatible factory wheel.
HALODISC 2 uses a model-specific installation and center-lock system. On applications that replace an original Tesla aero cover, remove the factory cover before installing HALODISC 2.
Fitment and Use Limitations
HALODISC 2 is designed for normal street driving.
The current product-use disclaimer states that HALODISC 2 is not intended for racing, track driving or use above 110 mph or 177 km/h. Improper installation or use outside the intended conditions may result in damage or detachment.
HALODISC 2 can add a layer of protection against minor scrapes and curb contact, but it cannot guarantee protection against severe impacts.
For cleaning, hand washing is recommended. HALOBLK’s Model X guidance currently warns against automatic car washes because brushes, pressure equipment or conveyor tracks may scratch or dislodge the covers.
Need Help Confirming Fitment?
Send Us Your Tesla Details
Suggested Confirmation Message
“Please do not install the product until you have confirmed that the model, generation, wheel size and factory wheel match your order. Installation of an incorrect fitment may damage the product or wheel.”